The use of emulsified oil for hydraulic support steps:
1. Cleaning hydraulic support: Before using emulsified oil, it is necessary to clean the hydraulic support, especially the hydraulic pipeline. Cleaning is mainly to remove the remaining oil and debris, so as not to have an impact on the machine.
2. Adding emulsified oil: After cleaning the hydraulic support, it is necessary to add the emulsified oil to the hydraulic support. When filling, care should be taken not to add too much emulsified oil to avoid affecting the hydraulic support equipment.
3. Start equipment: After adding emulsified oil, start the hydraulic support equipment to make the emulsified oil circulate in the hydraulic pipeline. It can increase the service life of the hydraulic support in the process of working.
4. Recycling: After the use of the hydraulic support equipment, the emulsified oil will be contaminated to a certain extent, and it needs to be recycled. The cycle filling can be controlled through the solenoid valve to ensure the service life and performance of the hydraulic support equipment.
When using emulsified oil for hydraulic support, the following points need to be noted:
1. Do not add too much emulsified oil, otherwise it will have a reverse reaction to the hydraulic support equipment.
2. It is necessary to clean the hydraulic support equipment regularly to avoid affecting the equipment.
3. It is necessary to use high-quality emulsified oil to ensure the normal operation of hydraulic support equipment.
