In some hydraulic components lubrication, the role of emulsified oil hydraulic support can not be underestimated, the use of emulsified oil can effectively protect the hydraulic system, prolong its service life, but in the process of using emulsified oil also need to pay attention to the relevant matters, to ensure safety and effectiveness, if random use not only will not achieve lubrication effect, and will lead to equipment failure, therefore, This article will take you to look at the use of emulsified oil for hydraulic support.
Although hydraulic support emulsified oil has many advantages and precautions, but we must know
● The first use of hydraulic support emulsion oil, need to thoroughly clean the need to lubricate the oil passage.
● The emulsified oil of hydraulic support shall not be mixed with other brands of emulsified oil. It is recommended that other brands of emulsified oils not be mixed during use, as the chemical composition is often different.
● Do not mix with groundwater or well water when using emulsified oil. Groundwater and well water usually contain many other substances.
● Emulsified oil concentration according to different requirements for distribution, high concentration is conducive to rust prevention and lubrication; Low concentration is suitable for high cooling.
● When preparing the metal working fluid, the water needs to be slowly injected into the emulsified oil of the hydraulic support, which cannot be reversed. Replenishment solution configuration shall be determined by water evaporation, daily consumption, and field solution configuration.
● If it often rains where you are, the air humidity is high, the diluent concentration needs to be increased appropriately;
● After the work is completed, the emulsified oil residue should be cleaned up in time to prevent the emulsified oil from corroding other parts. The emulsion to be recovered from the machine tool should be replaced regularly according to the actual situation, otherwise the emulsion oil may become thick or impurities, affecting the use efficiency.
● Cycle for two hours every day to prevent the emulsified oil of hydraulic support from smelling.
● Emulsified oil for a long time stratification, stirring evenly, normal use.
● Emulsified oil should be stored indoors to prevent the sun and rain, pay attention to fire emulsified oil should be rechecked for more than a year, qualified before use.
● Hydraulic support emulsion oil do not enter the eyes, cavity, such as miscontact, should immediately flush with a lot of water, if necessary, should be timely medical treatment.
